A Practical Anchor Point for Your Projects
These 304 stainless steel eye bolt expansion anchors combine a closed eye with an expansion sleeve for fastening into suitable solid substrates. Choose from three sizes and matching 4-piece or 8-piece packs.
304 Stainless Steel Construction
A practical choice for everyday fastening projects, the stainless steel construction offers corrosion resistance with a clean metal finish.
Select the size to suit your installation, and check that the anchor is appropriate for the substrate and exposure conditions.
Expansion Sleeve Fastening
Tightening the hex nut draws the expansion mechanism into the sleeve, pressing it against the sides of the prepared hole. Correct hole sizing and installation are essential to the connection.
- Complete assembly: Each anchor includes the eye bolt, expansion sleeve, nut and washer components shown.
- Three sizes: Choose M6, M8 or M10 using the measurements below.
A Closed Eye for Compatible Connectors
The rounded eye provides an attachment point for compatible hooks, clips, cords or cables. Check the eye opening against the connector you plan to use before choosing a size.
The eye opening varies between models, from 12.5 mm on the M6 version to 21 mm on the M10 version.
Choose Your Size
M6, M8 and M10 identify the metric thread size. They do not indicate the required drill-hole diameter. Overall length includes the eye and anchor body.
| Specification | M6 | M8 | M10 |
|---|---|---|---|
| Overall length | 3.54" (90 mm) |
4.17" (106 mm) |
4.84" (123 mm) |
| Eye inner diameter | 0.49" (12.5 mm) |
0.77" (19.5 mm) |
0.83" (21 mm) |
| Specified drill-hole diameter | 10 mm | 12 mm | 14 mm |
| Specified drill-hole depth | 50 mm | 50 mm | 60 mm |
| Approx. weight per anchor | 0.99 oz (28 g) |
1.94 oz (55 g) |
3.32 oz (94 g) |
Plan Your Installation
Check the substrate and manufacturer's installation instructions before drilling. Use the drill-hole diameter specified for your selected model.
- Prepare: Confirm a suitable solid base and a clear drilling location.
- Drill and clean: Prepare the hole to the specified dimensions and remove drilling dust as instructed.
- Position: Insert the sleeve to the required installation depth, leaving the eye accessible above the surface.
- Secure: Tighten the nut according to the manufacturer's installation requirements and check the completed fixing.
Choose Your Pack
Every pack contains complete anchors in one selected size, making it easy to keep matching hardware together for your project.
Includes 4 complete anchors in your selected M6, M8 or M10 size.
Includes 8 complete anchors in your selected M6, M8 or M10 size.
Packs contain one size only. Select the size and pack quantity before adding to cart.
Frequently Asked Questions
Which size and drill bit should I choose?
Check the overall length and eye opening against your project requirements. The manufacturer specifies a 10 mm hole for M6, a 12 mm hole for M8 and a 14 mm hole for M10. The M-size is the thread size, not the drill-hole diameter.
Can these be installed in drywall or hollow walls?
These are expansion-sleeve anchors, not drywall anchors. Confirm suitability for your specific solid substrate before installation. Do not assume they are suitable for hollow walls, hollow brick or damaged masonry.
Does a pack contain different sizes?
No. You receive either 4 or 8 complete anchors, all in the single size you select: M6, M8 or M10.